How to Install TWRP Recovery and Root Xiaomi Redmi 4A
TWRP Recovery and Root Xiaomi Redmi 4A
In this article, we will guide you how to Install TWRP Recovery and Root Xiaomi Redmi 4A. Follow the below step by step guide to install TWRP Recovery and Root Xiaomi Redmi 4A.
Xiaomi released Redmi 4A in 2016, November with 5.0 inches 720×1280 pixels display. This device is loaded with Qualcomm MSM8917 Snapdragon 425 chipset, Quad-core 1.4 GHz Cortex-A53 CPU, Adreno 308 GPU with 4GB of RAM. This device is packed with 13 MP primary camera, 5 MP front-facing camera with Non-removable Li-Ion 3120 mAh battery.
TeamWin recovery project or simply TWRP recovery is software which allows you to install unofficial firmware on your device. Most people prefer to use TWRP recovery because it has the touch-based user interface which makes flashing an image very simple. Earlier it supports only Nexus devices but now it is available for wide range of phones. It also comes with various customizations supports such as gaining root access, making a Nandroid backup, installing a custom kernel, removing bloatware etc. It has an XML based Graphic User Interface which gives an advantage of modifying the recovery, ultimately makes it a best android custom recovery.
When comes to restoring the backup data TWRP allows you to Select as many partitions whereas in CWM recovery you can restore only one partition. Most people install the custom recovery to tweak their devices and when it comes to the installation of custom ROMs both CWM and TWRP work great but one feature takes TWRP recovery to higher level i.e. you can access the file manager of your device when you are in recovery mode. Adb commands plays an important role while installing TWRP recovery which makes complexes for beginners whereas there is only one click installation process for Clockwork mode recovery via Rom manager app owned by CWM.
The whole process is fairly simple and can be completed within 10-15 min. We have already mentioned that one of the most preferred uses of TWRP recovery is that you can use it to flash custom ROMs on your device with the help of stock recovery. So let us see How to Install TWRP Recovery and Root Xiaomi Redmi 4A.
- This guide only for Xiaomi Redmi 4A.
- Unlocked Bootloader.
- Remember to take a backup of your files before beginning to install TWRP and root your device.
- Your device must have more than battery to prevent the sudden shutdown.
Steps to Install TWRP Recovery and Root Xiaomi Redmi 4A
Install TWRP Recovery
- Download and Install ADB drivers.
- Now, download Redmi 4A TWRP recovery .img.
- Move downloaded TWRP .img file to ADB folder (In C: Drive) and rename the file to “TWRP”.
- Enable the USB debugging on your device after enabling ‘Developer Options’ by going to ‘About phone’ and tapping build number 7 times.
- Go to ADB folder (In C: Drive) and then press “Shift + Right mouse key” and tap on “Open command window here.”
- Now connect your device to the PC using a USB data cable.
└ Check your device’s screen, if it asks permission for “Allow USB debugging”, accept it by selecting OK or Yes.
- Execute the following command to confirm your device is connected. If your device is successfully connected it will return device serial number. If not, then check your drivers are installed or not
Windows: fastboot devices
Mac: ./fastboot devices
- Boot your device into “Fastboot” mode and give the following command reboot bootloader
Windows: adb reboot bootloader
Mac: ./adb reboot bootloader
- Your device will start booting in fastboot mode. Now to flash recovery image on the device type the following command.
Windows: fastboot flash recovery TWRP.img
Mac: ./fastboot flash recovery TWRP.img
- To Bypass device encryption you have to format user data.
Windows: fastboot format userdata
Mac: ./fastboot format userdata
It can be checked by long pressing “Volume down + Power” buttons until your device boots into recovery mode.
Root Redmi 4A via TWRP recovery
- Download SuperSU or Latest Magisk Zip from above link and save the downloaded zip file into your device
- Reboot your device into TWRP Recovery.
- Switch off your device.
- Press and hold “Volume down + Power” buttons until you see anything on the screen.
- Now in the TWRP main menu, Click on Wipe and swipe to factory reset on the bottom of the screen.
- Go back to the main menu in TWRP, tap on install and select the SuperSU or Magisk zip file which you have saved in your device.
- After selecting the magisk or SuperSU zip file, do swipe to confirm flash to begin the installation process.
- Once the installation process is completed, You will see Wipe cache/Dalvik option, tap on it and Swipe to wipe.
- After flashing magisk or SuperSU, reboot your device from the main menu.
Hope you have installed TWRP Recovery and Root Xiaomi Redmi 4A. Let us know if you have any queries in the comment section below.