Connect with us

Recovery | Root

How to Install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime/Redmi Y1

Published

on

Install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime/Redmi Y1 In this article, we will guide you how to install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime

Install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime/Redmi Y1

In this article, we will guide you how to install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime or Redmi Y1.

TeamWin recovery project or simply TWRP recovery is software which allows you to install unofficial firmware on your device. Most people prefer to use TWRP recovery because it has the touch-based user interface which makes flashing an image very simple. Earlier it supports only Nexus devices but now it is available for wide range of phones. It also comes with various customizations supports such as gaining root access, making a Nandroid backup, installing a custom kernel, removing bloatware etc. It has an XML based Graphic User Interface which gives an advantage of modifying the recovery, ultimately makes it a best android custom recovery.

When comes to restoring the backup data TWRP allows you to Select as many partitions whereas in CWM recovery you can restore only one partition. Most people install the custom recovery to tweak their devices and when it comes to the installation of custom ROMs both CWM and TWRP work great but one feature takes TWRP recovery to higher level i.e. you can access the file manager of your device when you are in recovery mode. Adb commands plays an important role while installing TWRP recovery which makes complexes for beginners whereas there is only one click installation process for Clockwork mode recovery via Rom manager app owned by CWM.

Installing the custom ROMs, backing up and restoring the data takes a much time to complete the process. TWRP recovery has a Lock screen feature which ultimately turns off the screen with a slider lock after a while of starting the process. Now according to me, both CWM and TWRP recovery works flawlessly for the installation of custom ROMs. There are not many differences between these two recoveries; it depends on the user as both the recovery performs the same action. If you are a beginner than better go with TWRP recovery as it has a clean interface with large buttons which reduces the chances of mistakes while tweaking the devices. Install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime/Redmi Y1.

Install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime/Redmi Y1 In this article, we will guide you how to install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime

The whole process is fairly simple and can be completed within 10-15 min. We have already mentioned that one of the most preferred uses of TWRP recovery is that you can use it to flash custom ROMs on your device with the help of stock recovery. So let us see How to Install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime/Redmi Y1.

Pre-requisites

  1. This guide only for Xiaomi Redmi Note 5A Prime/Redmi Y1.
  2. Unlocked Bootloader.

  3. Remember to take a backup of your files before beginning to install TWRP and root your device.
  4. Your device must have more than 50% battery to prevent the sudden shutdown.

Steps to Install TWRP Recovery and Root Xiaomi Redmi Note 5A Prime/Redmi Y1

Install TWRP Recovery

  1. Download and Install ADB drivers.
  2. Now, download Redmi Note 5A Prime/Redmi Y1 TWRP recovery .img.
  3. Move downloaded TWRP .img file to ADB folder (In C: Drive) and rename the file to “TWRP”.
  4. Enable the USB debugging on your device after enabling ‘Developer Options’ by going to ‘About phone’ and tapping build number 7 times.
    Usb debugging
  5. Go to ADB folder (In C: Drive) and then press “Shift + Right mouse key” and tap on “Open command window here.”
    AMD COMMAND
  6. Now connect your device to the PC using a USB data cable.
    └ Check your device’s screen, if it asks permission for “Allow USB debugging”, accept it by selecting OK or Yes.
  7. Execute the following command to confirm your device is connected. If your device is successfully connected it will return device serial number. If not, then check your drivers are installed or not
    Windows: fastboot devices
    Mac: ./fastboot devices
  8. Boot your device into “Fastboot” mode and give the following command reboot bootloader
    Windows: adb reboot bootloader
    Mac: ./adb reboot bootloader
  9. Your device will start booting in fastboot mode. Now to flash recovery image on the device type the following command.
    Windows: fastboot flash recovery TWRP.img
    Mac: ./fastboot flash recovery TWRP.img
  10. To Bypass device encryption you have to format user data.
    Windows: fastboot format userdata
    Mac: ./fastboot format userdata

That’s all! You have rooted your Redmi Note 5A Prime/Redmi Y1 using TWRP recovery. It can be checked by long pressing “Volume down + Power” buttons until your device boots into recovery mode.

Root Redmi Note 5A Prime/Redmi Y1 via TWRP recovery

  1. Download SuperSU or Latest Magisk Zip from above link and save the downloaded zip file into your device
  2. Reboot your device into TWRP Recovery.
    1. Switch off your device.
    2. Press and hold “Volume down + Power” buttons until you see anything on the screen.
  3. Now in the TWRP main menu, Click on Wipe and swipe to factory reset on the bottom of the screen.
  4. Go back to the main menu in TWRP, tap on install and select the SuperSU or Magisk zip file which you have saved in your device.
    TWRP ROM
  5. After selecting the magisk or SuperSU zip file, do swipe to confirm flash to begin the installation process.
  6. Once the installation process is completed, You will see Wipe cache/Dalvik option, tap on it and Swipe to wipe.
  7. After flashing magisk or SuperSU, reboot your device from the main menu.
  8. Done!!!

Hope you have installed TWRP Recovery and Root Xiaomi Redmi Note 5A Prime/Redmi Y1. Let us know if you have any queries in the comment section below.

I am a Tech Content writer and full-time blogger. Started my career as Engineer in Larsen and Toubro LTD. with 3 years of experience in Hyderabad Metro Rail Project. I have been doing blogging since 2015, started with zero experience and now I am the well-recognized blogger. I like learning new things and believe that there can never be an end to learning.

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Recovery | Root

How to Install TWRP Recovery and Root Lenovo Zuk Z2 Pro

Published

on

TWRP Recovery and Root Lenovo Zuk Z2 Pro

Install TWRP Recovery and Root Lenovo Zuk Z2 Pro

In this article, we will guide you How to Install TWRP Recovery and Root Lenovo Zuk Z2 Pro. Follow the below step by step guide to root your Lenovo Zuk Z2 Pro and Install TWRP recovery on it.

Lenovo Zuk Z2 Pro is the budget-friendly smartphones. Lenovo Zuk Z2 Pro is packed with a 5.2-inch Gorilla Glass Scratch Resistant display with a resolution of 1080 x 1920 pixels at 424 PPI and 6GB of RAM with Snapdragon 820 chipset and Non-removable Li-Ion 3100 mAh battery.

TWRP recovery is a custom version of stock recovery which is used to flash custom ROMs. It is highly popular and is one of the most preferred methods used while rooting or installing custom ROMs.

If you are a user of Lenovo Zuk Z2 Pro, then there is incredibly good news for you. You have the opportunity to easily root your device by installing TWRP. All that is needed is unlocking the bootloader of your device which will grant you the root access on your phone with the assistance of TWRP recovery.

The whole process is fairly simple and can be completed within 10-15 min. We have already mentioned that one of the most preferred uses of TWRP recovery is that you can use it to flash custom ROMs on your device with the help of stock recovery. So let us see How to Install TWRP Recovery and Root Lenovo Zuk Z2 Pro.

Pre-requisites

  1. This guide only for Lenovo Zuk Z2 Pro.
  2. Unlock Bootloader of Lenovo Zuk Z2 Pro
  3. Remember to take a backup of your files before beginning to install TWRP and root your device.
  4. Your device must have more than 50% battery to prevent the sudden shutdown.

Downloads

ADB and Fastboot Drivers for Windows | Mac

TWRP Recovery zip for Lenovo Zuk Z2 Pro

Latest Magisk ZIP | Magisk APK

SuperSU

Steps to Install TWRP Recovery and Root Lenovo Zuk Z2 Pro

Install TWRP Recovery

  1. Download and Install ADB drivers.
  2. Now, download Lenovo Zuk Z2 Pro TWRP recovery .img.
  3. Move downloaded TWRP file to ADB folder (In C: Drive) and rename the file to “TWRP”.
  4. Enable the USB debugging on your device after enabling ‘Developer Options’ by going to ‘About phone’ and tapping build number 7 times.
    Usb debugging
  5. Go to ADB folder (In C: Drive) and then press “Shift + Right mouse key” and tap on “Open command window here.”
    AMD COMMAND
  6. Now connect your device to the PC using a USB data cable.
  7. Boot your device into “Fastboot” mode and give the following command reboot bootloader

    adb reboot bootloader

  8. Your device will start booting in fastboot mode. Now to flash recovery image on the device type the following command.

    fastboot flash recovery TWRP.img

  9. To Bypass device encryption you have to format user data.

    fastboot format userdata

That’s all! You have rooted your Lenovo Zuk Z2 Pro using TWRP recovery. It can be checked by long pressing “Volume down + Power” buttons until your device boots into recovery mode.

Root Lenovo Zuk Z2 Pro via TWRP recovery

  1. Download SuperSU or Latest Magisk Zip from above link and save the downloaded zip file into your device
  2. Reboot your device into TWRP Recovery.
    1. Switch off your device.
    2. Press and hold “Volume down + Power” buttons until you see anything on the screen.
  3. Now in the TWRP main menu, Click on Wipe and swipe to factory reset on the bottom of the screen.
  4. Go back to the main menu in TWRP, tap on install and select the SuperSU or Magisk zip file which you have saved in your device.
    TWRP Recovery
  5. After selecting the magisk or SuperSU zip file, do swipe to confirm flash to begin the installation process.
    TWRP Swipe
  6. Once the installation process is completed, You will see Wipe cache/Dalvik option, tap on it and Swipe to wipe.
  7. After flashing magisk or SuperSU, reboot your device from the main menu.
  8. Done!!!

Hope you have installed TWRP Recovery and Root Lenovo Zuk Z2 Pro. Let us know if you have any queries in the comment section below.

Continue Reading

Recovery | Root

How to Install TWRP Recovery and Root Sony Xperia Z2 (Sirius)

Published

on

TWRP Recovery and Root Sony Xperia Z2

Install TWRP Recovery and Root Sony Xperia Z2

In this article, we will guide you How to Install TWRP Recovery and Root Sony Xperia Z2 [Sirius]. Follow the below step by step guide to root your Sony Xperia Z2 and Install TWRP recovery on it.

Sony Xperia Z2 is the budget-friendly smartphones. Sony Xperia Z2 is packed with a 5.2-inch Gorilla Glass Scratch Resistant display with a resolution of 1080 x 1920 pixels at 424 PPI and 3GB of RAM with Snapdragon 801 chipset and Non-removable Li-Ion 3200 mAh battery.

TWRP recovery is a custom version of stock recovery which is used to flash custom ROMs. It is highly popular and is one of the most preferred methods used while rooting or installing custom ROMs.

If you are a user of Sony Xperia Z2, then there is incredibly good news for you. You have the opportunity to easily root your device by installing TWRP. All that is needed is unlocking the bootloader of your device which will grant you the root access on your phone with the assistance of TWRP recovery.

The whole process is fairly simple and can be completed within 10-15 min. We have already mentioned that one of the most preferred uses of TWRP recovery is that you can use it to flash custom ROMs on your device with the help of stock recovery. So let us see How to Install TWRP Recovery and Root Sony Xperia Z2.

Pre-requisites

  1. This guide only for Sony Xperia Z2.
  2. Unlocked Bootloader.
  3. Remember to take a backup of your files before beginning to install TWRP and root your device.
  4. Your device must have more than 50% battery to prevent the sudden shutdown.

Downloads

ADB and Fastboot Drivers for Windows | Mac

TWRP recovery zip for Sony Xperia Z2

 Latest Magisk ZIP |  Magisk APK

SuperSU

Steps to Install TWRP Recovery and Root Sony Xperia Z2

Install TWRP Recovery

  1. Download and Install ADB drivers.
  2. Now, download Sony Xperia Z2 TWRP recovery .img.
  3. Move downloaded TWRP .img file to ADB folder (In C: Drive) and rename the file to “TWRP”.
  4. Enable the USB debugging on your device after enabling ‘Developer Options’ by going to ‘About phone’ and tapping build number 7 times.
    Usb debugging
  5. Go to ADB folder (In C: Drive) and then press “Shift + Right mouse key” and tap on “Open command window here.”
    AMD COMMAND
  6. Now connect your device to the PC using a USB data cable.
    └ Check your device’s screen, if it asks permission for “Allow USB debugging”, accept it by selecting OK or Yes.
  7. Execute the following command to confirm your device is connected. If your device is successfully connected it will return device serial number. If not, then check your drivers are installed or not
    Windows: fastboot devices
    Mac: ./fastboot devices
  8. Boot your device into “Fastboot” mode and give the following command reboot bootloader
    Windows: adb reboot bootloader
    Mac: ./adb reboot bootloader
  9. Your device will start booting in fastboot mode. Now to flash recovery image on the device type the following command.
    Windows: fastboot flash recovery TWRP.img
    Mac: ./fastboot flash recovery TWRP.img
  10. To Bypass device encryption you have to format user data.
    Windows: fastboot format userdata
    Mac: ./fastboot format userdata

That’s all! You have rooted your Sony Xperia Z2 using TWRP recovery. It can be checked by long pressing “Volume down + Power” buttons until your device boots into recovery mode.

Root Sony Xperia Z2 via TWRP recovery

  1. Download SuperSU or Latest Magisk Zip from above link and save the downloaded zip file into your device
  2. Reboot your device into TWRP Recovery.
    1. Switch off your device.
    2. Press and hold “Volume down + Power” buttons until you see anything on the screen.
  3. Now in the TWRP main menu, Click on Wipe and swipe to factory reset on the bottom of the screen.
  4. Go back to the main menu in TWRP, tap on install and select the SuperSU or Magisk zip file which you have saved in your device.
    TWRP Recovery
  5. After selecting the magisk or SuperSU zip file, do swipe to confirm flash to begin the installation process.
  6. Once the installation process is completed, You will see Wipe cache/Dalvik option, tap on it and Swipe to wipe.
  7. After flashing magisk or SuperSU, reboot your device from the main menu.
  8. Done!!!

Hope you have installed TWRP Recovery and Root Sony Xperia Z2. Let us know if you have any queries in the comment section below.

Continue Reading

Recovery | Root

How to Install TWRP Recovery and Root Moto G5S Plus [sanders]

Published

on

TWRP Recovery and Root Moto G5S Plus

Install TWRP Recovery and Root Moto G5S Plus [sanders]

In this article, we will guide you How to Install TWRP Recovery and Root Moto G5S Plus [sanders]. Follow the below step by step guide to root your Moto G5S Plus and Install TWRP recovery on it.

Moto G5S Plus is the budget-friendly smartphones. Moto G5S Plus is packed with a 5.5-inch Gorilla Glass Scratch Resistant display with a resolution of 1080 x 1920 pixels at 401 PPI and 4GB of RAM with Snapdragon 625 chipset and Non-removable Li-Ion 3000 mAh battery.

TWRP recovery is a custom version of stock recovery which is used to flash custom ROMs. It is highly popular and is one of the most preferred methods used while rooting or installing custom ROMs.

If you are a user of Moto G5S Plus, then there is incredibly good news for you. You have the opportunity to easily root your device by installing TWRP. All that is needed is unlocking the bootloader of your device which will grant you the root access on your phone with the assistance of TWRP recovery.

The whole process is fairly simple and can be completed within 10-15 min. We have already mentioned that one of the most preferred uses of TWRP recovery is that you can use it to flash custom ROMs on your device with the help of stock recovery. So let us see How to Install TWRP Recovery and Root Moto G5S Plus.

Pre-requisites

  1. This guide only for Moto G5S Plus.
  2. Unlock Bootloader of Moto G5S Plus
  3. Remember to take a backup of your files before beginning to install TWRP and root your device.
  4. Your device must have more than 50% battery to prevent the sudden shutdown.

Downloads

ADB and Fastboot Drivers for Windows | Mac

TWRP Recovery zip for Moto G5S Plus

Latest Magisk ZIP | Magisk APK

SuperSU

Steps to Install TWRP Recovery and Root Moto G5S Plus [sanders]

Install TWRP Recovery

  1. Download and Install ADB drivers.
  2. Now, download Moto G5S Plus TWRP recovery .img.
  3. Move downloaded TWRP file to ADB folder (In C: Drive) and rename the file to “TWRP”.
  4. Enable the USB debugging on your device after enabling ‘Developer Options’ by going to ‘About phone’ and tapping build number 7 times.
    Usb debugging
  5. Go to ADB folder (In C: Drive) and then press “Shift + Right mouse key” and tap on “Open command window here.”
    AMD COMMAND
  6. Now connect your device to the PC using a USB data cable.
  7. Boot your device into “Fastboot” mode and give the following command reboot bootloader

    adb reboot bootloader

  8. Your device will start booting in fastboot mode. Now to flash recovery image on the device type the following command.

    fastboot flash recovery TWRP.img

  9. To Bypass device encryption you have to format user data.

    fastboot format userdata

That’s all! You have rooted your Moto G5S Plus using TWRP recovery. It can be checked by long pressing “Volume down + Power” buttons until your device boots into recovery mode.

Root Moto G5S Plus via TWRP recovery

  1. Download SuperSU or Latest Magisk Zip from above link and save the downloaded zip file into your device
  2. Reboot your device into TWRP Recovery.
    1. Switch off your device.
    2. Press and hold “Volume down + Power” buttons until you see anything on the screen.
  3. Now in the TWRP main menu, Click on Wipe and swipe to factory reset on the bottom of the screen.
  4. Go back to the main menu in TWRP, tap on install and select the SuperSU or Magisk zip file which you have saved in your device.
    TWRP Recovery
  5. After selecting the magisk or SuperSU zip file, do swipe to confirm flash to begin the installation process.
    TWRP Swipe
  6. Once the installation process is completed, You will see Wipe cache/Dalvik option, tap on it and Swipe to wipe.
  7. After flashing magisk or SuperSU, reboot your device from the main menu.
  8. Done!!!

Hope you have installed TWRP Recovery and Root Moto G5S Plus. Let us know if you have any queries in the comment section below.

Continue Reading